 
 Program - USB_MultiBoot_10.cmd - 06 June 2008 - Date = 11.12.2008 12:05:57 
 
 Prepares MultiBoot USB-Drive provided with Windows XP Setup LocalSource 
 Supports Booting: MS-DOS  BartPE  WinPE 2.0 and Setup Windows XP 
 GRUB4DOS Menu with DOS FLOPPY IMAGES + Linux + Vista Setup and SYSLINUX Menu 
 
 *** BEFORE YOU START: ***  Use USB-stick with High Read/Write Speed 
 For Vista OS SET User Account Control OFF - XP OS is Preferred for Speed 3x 
 FOR USB-Harddisk make 1900 MB partition at beginning of the USB-Harddisk 
 Use FAT Format and Set Active OR use PeToUSB to Format such partition 
 OR make USB-Harddisk with NTFS Format and NTLDR BootSector using Windows XP 
 Multi-Partition an USB-stick after using INSTALL_DUMMY.cmd for dummydisk 
 
 HELP SEE: http://www.msfn.org/board/install-XP-USB-t111406.html 
 Use RyanVM Integrator or nLite to Integrate UpdatePacks in your XPSOURCE 
 Integrate in your XPSOURCE BTS DriverPack Massstorage with TXT Mode Enabled 
 Using DPsBase.exe in 1 minute from http://driverpacks.net/DriverPacks/ 
 
 OEM or nLite winnt.sif File is Auto Changed for Install of XP from USB 
 For UNATTENDED XP Install use the build in Auto Edit UserData Setup 
 Give ProductKey and TimeZone used in Current_winnt.sif Copy of your winnt.sif 
 Remove all other Removable Drives, like USB Backup Harddisks and Memory Cards 
 
 HPUSBFW.EXE was launched to FORMAT USB-Drive

 =============================================================================
 ================= PART 1 - Preparing Temporary Folder usb_xpbt ==============
 =============================================================================
 DriveList FAT FAT32 NTFS
 drives   =  D: E: F: G: H: O:
 mkbtpath = C:\Documents and Settings\\稩 ⮫\USB_MultiBoot_10\USB_MultiBoot_10\

 usb_type = USB-stick
 usbdrive = O:  has FileSystem = FAT32
 xpsource = D:\WXPSP3I
 usbconfg = C:\MULTI_CONTENT
 bartpe   = 
 vista    = 

 boot_ini = b_ini\XP_Setup_boot.ini
 winnt_sif= w_sif\Current_winnt.sif
 oemd_dir = $OEM$_UserXP
 lang_w98 = NO
 log type = Simple
 SYSLINUX = NO
 REC_CONS = NO
 XPSETUP  = Undefined
 USER_NAME= UserXP

 Date = 11.12.2008 12:07:01

 *** Make Temporary Folder usb_xpbt with Custom XP Setup BootFiles ***

 Parse DOSNET.INF for making Windows XP Setup Bootfolder $WIN_NT$.~BT

 Making Recovery Console Folder cmdcons ....


 Making Recovery Console Folder cmdcons Ready
 Making Windows XP Setup Bootfolder usb_xpbt\$WIN_NT$.~BT - READY
 Date = 11.12.2008 12:07:13

makebt\binifix4.cmd
஢ 䠩: 1.

makebt\migrate.inf
஢ 䠩: 1.

 Copy winnt.sif file from w_sif\Current_winnt.sif and for Attended Setup make winat.sif
஢ 䠩:         1.
஢ 䠩:         1.

makebt\ren_fold.cmd
஢ 䠩: 1.

makebt\undoren.cmd
஢ 䠩: 1.

஢ 䠩:         1.

D:\WXPSP3I\i386\TXTSETUP.SIF
஢ 䠩: 1.

D:\WXPSP3I\i386\BOOTFONT.BIN
஢ 䠩: 1.

D:\WXPSP3I\i386\NTDETECT.COM
஢ 䠩: 1.

D:\WXPSP3I\i386\NTLDR
஢ 䠩: 1.

 Copy setupldr.bin Renamed as XPSTP because of 5 letter-limit in NTFS BootSector
஢ 䠩:         1.
஢ 䠩:         1.
usb_xpbt\XATSP: 0x22602
usb_xpbt\XATSP: 0x2260e
usb_xpbt\XATSP: 0x226e6
usb_xpbt\XATSP: 0x2280a
usb_xpbt\XATSP: 0x22816
usb_xpbt\XATSP: 5 occurrences changed

 Custom files and XP Root files Copied to Temporary Folder usb_xpbt Ready

 Adding lines to TXTSETUP.SIF Ready

 Adding lines to WINNT.SIF Ready

 Adding $OEM$ folder with UserAccounts and Registry Tweaks
$OEM$_UserXP\autologon_reg.txt
$OEM$_UserXP\CancelTour.reg
$OEM$_UserXP\CmdHere.reg
$OEM$_UserXP\CMDLINES.TXT
$OEM$_UserXP\Disable_LangBar.reg
$OEM$_UserXP\Disable_Shortcut_To.reg
$OEM$_UserXP\Disable_SystemRestore.reg
$OEM$_UserXP\HKCU_Explorer_Tweaks.reg
$OEM$_UserXP\NoDriveAutoRun_FZ.reg
$OEM$_UserXP\NoWinUp_DriverSearching.reg
$OEM$_UserXP\SetClearTypeAU.reg
$OEM$_UserXP\SET_WUP.cmd
$OEM$_UserXP\useraccounts.cmd
$OEM$_UserXP\$$\System32\oobe\OOBEINFO_INI.txt
஢ 䠩: 14.
  No Changes - XPSETUP = Undefined   USER_NAME = UserXP 
  Adding $OEM$ folder with Registry Tweaks Ready

 *** Make Temporary Folder usb_xpbt with Custom XP Setup BootFiles Ready ***

 =============================================================================
 === PART 2 - Copy USB Content Source to USB-Drive, Make BootSector Files ====
 =============================================================================

 USB-Drive - 50 = 15593 MB   Existing Folder $WIN_NT$.~LS = 0 MB
 USB-Drive FREE = 15593 MB + 50 MB Reserved 
 Content Source = 1 MB   Windows XP Source + OEM Fold = 627 MB
 BartPE  Source = 0 MB   Vista Source = 0 MB

 Making Backups on USB-Drive and Preparing for FileCopy ....

 Copy Files to USB-Drive Start - Date = 11.12.2008 12:07:24

 USB Content Source Folder   Copy to USB-Drive Begin   Date = 11.12.2008 12:07:24
 USB Content Source Folder   Copy to USB-Drive Ready   Date = 11.12.2008 12:07:32

  Copy XP BootFiles and boot.ini If not exist .....
usb_xpbt\boot.ini
஢ 䠩: 1.

usb_xpbt\BOOTFONT.BIN
஢ 䠩: 1.

usb_xpbt\NTDETECT.COM
஢ 䠩: 1.

usb_xpbt\NTLDR
஢ 䠩: 1.

 Make Bootsector Files in btsec Folder ....

usb_xpbt\XPSTP
஢ 䠩: 1.

usb_xpbt\XATSP
஢ 䠩: 1.
 BootSector Files for TXT Mode Setup XP were made

 No FAT Format - Remove MS-DOS and WinPE 2.0 from boot.ini Menu

 =============================================================================
 ================= PART 3 - Copy XP Source to USB-Drive ======================
 =============================================================================

 USB-Drive - 50 = 15593 MB   Existing Folder $WIN_NT$.~LS = 0 MB
 USB-Drive FREE = 15590 MB + 50 MB Reserved 
 Win XP  Source = 627 MB
 BartPE  Source = 0 MB   Vista Source = 0 MB

 $WIN_NT$.~BT Folder   Copy to USB-Drive Begin   Date = 11.12.2008 12:07:34
 $WIN_NT$.~BT Folder   Copy to USB-Drive Ready   Date = 11.12.2008 12:07:42

usb_xpbt\TXTSETUP.SIF
஢ 䠩: 1.

usb_xpbt\XPSTP
஢ 䠩: 1.

 Copy XPSOURCE Folders cmpnents and i386 - Begin   Date = 11.12.2008 12:07:43
 Copy XP Folders cmpnents and i386 AMD64 - Ready   Date = 11.12.2008 12:15:47

 Copy Custom Files + $OEM$ Folder To USB-Drive
usb_xpbt\$WIN_NT$.~LS\$OEM$\autologon_reg.txt
usb_xpbt\$WIN_NT$.~LS\$OEM$\CancelTour.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\CmdHere.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\CMDLINES.TXT
usb_xpbt\$WIN_NT$.~LS\$OEM$\Disable_LangBar.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\Disable_Shortcut_To.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\Disable_SystemRestore.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\HKCU_Explorer_Tweaks.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\NoDriveAutoRun_FZ.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\NoWinUp_DriverSearching.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\SetClearTypeAU.reg
usb_xpbt\$WIN_NT$.~LS\$OEM$\SET_WUP.cmd
usb_xpbt\$WIN_NT$.~LS\$OEM$\useraccounts.cmd
usb_xpbt\$WIN_NT$.~LS\$OEM$\$$\System32\oobe\OOBEINFO_INI.txt
usb_xpbt\$WIN_NT$.~LS\I386\binifix4.cmd
usb_xpbt\$WIN_NT$.~LS\I386\ren_fold.cmd
usb_xpbt\$WIN_NT$.~LS\I386\undoren.cmd
஢ 䠩: 17.

 FileCopy to USB-Drive is Ready - Date = 11.12.2008 12:15:49

 =============================================================================
 ============ PART 5 Finish - COPY VISTA TO USB - Change migrate.inf =========
 =============================================================================

 No BartPE Folders - BartPE Removed from boot.ini Menu

 No Vista Directory - Skip Vista Copy

 USB-Drive becomes Boot Drive U: - MkMigrateInf2 Ready

 ============================================================================= 
 *** HELP for Using MultiBoot USB-Drive *** Read Help_USB_MultiBoot.txt File 
 Boot with USB-Drive plugged and Press [Delete] or F2 to Enter BIOS Setup 
 Change BIOS Boot Settings: 
 Harddisk is First Boot Device Type and USB-Drive is seen as First Harddisk 
 Reboot from USB-Drive and Make Selection from Boot Menu 
 ============================================================================= 
 ***** HELP for Using USB-Drive for Install of Windows XP: ***** 
 
 First Remove ALL Other USB-Drives ** So Harddisk in Setup gets DriveLetter C 
 Reboot from USB-Drive and Select  1. Begin TXT Mode Setup Windows XP 
 Use Only C: Drive of Computer Harddisk as Partition for Install of Windows XP 
 and then Select Quick Format with NTFS FileSystem, XP Install is Automatic 
 
 ***** NEVER UNPLUG USB-Drive ***** Until After First Logon of Windows XP 
 
 New Harddisk and Creating Partitions after Booting from USB-Drive: 
 Direct after Deleting and Creating New partitions, Quit XP Setup with F3 
 OR Switch OFF your Computer and Boot in any case from USB-Drive again and 
 Run 1. TXT Mode Setup again so that DriveLetters get their Correct Value 
 So in this case one Boots ** TWICE ** in the TXT-mode Setup 
 
 End Program - USB_MultiBoot.CMD will be Closed - Date = 11.12.2008 12:15:56 
 
